Bóna K.
,
Sárdi D. L.
Simulation modelling in the sizing of city logistics systems – a study for concentrated delivery points
Bubenkó M.
,
Fegyverneki Gy.
,
Molnár D.
,
Tokár M.
The effect of the excess Titanium content on the microstructure of Al – Si foundry alloys
Bubonyi T.
,
Bánóczy Zs.
,
Barkóczy P.
,
Buza G.
Local Annealing of Cold Rolled Aluminum Sheets by LASER Treatment
Darabos A.
The observation of natural analogies and their use in design
Darabos A.
,
Szalai J.
Use Design or technology: The antique Römer glass
Hajdu S.
,
Bodnár D.
Accuracy Analysis of Two Parallel Manipulators
Hanon M. M.
,
Kovács M.
,
Zsidai L.
Tribological Behaviour Comparison of ABS Polymer Manufactured Using Turning and 3D Printing
Hriczó K.
Boundary Value Problem for a Heated Nanofluid Flow in the Presence of Magnetic Field
Ibraheem A.
,
Szodrai F.
Numerical Model Analysis of Natural Gas Combustion Burners
Javorek Ľ.
Dependence of the passive force Fp from the revolutions, back engagement of cutting edge ae, working engagement of the cutting edge ap during milling
Juhász G.
,
Berczeli M.
,
Weltsch Z.
Surface activation of High Impact Polystyrene substrate using dynamic atmospheric pressure plasma
Kapitány P.
,
Lénárt J.
Kinematics and Control of a Planar Cable Robot
Nagy A.
,
Lakatos I.
Examining the movement differences in the behavior of normal and rack railway vehicle
Lámer G.
Displacement: translation and rotation. Differences and Similarities in the Discrete and Continuous Models
Lates D.
,
Casvean M.
Experimental Study Regarding The Influence Of Compliant Hinges Geometry In Mechanical Structures
Mohamad B.
,
Jalics K.
,
Kermani M.
Exhaust System Muffler Volume Optimization of Light Commercial passenger Car Using Transfer Matrix Method
Nemes Cs.
,
Javorek L.
,
Bodzás S.
,
Pálinkás S.
The Measurement of The Three Components of The Cutting Force During The Turning Process
Németh G.
,
Péter J.
Development of Efficient Drive Based on Self-help
Puskás E.
,
Bohács G.
Physical Internet – a novel application area for Industry 4.0
Román K.
,
Zsoldos G.
PVC/LDPE Blends: Relationship Between Thermal/Mechanical Properties, Structure and Blend Behaviour
Korkulu S.
,
Bona K.
Flexibility analysis of inventory cost model with ergonomics
Rónai L.
,
Szabó T.
Application of Rexroth Controlling for Inverted Pendulum
Saleh M.
,
Szodrai F.
Numerical Model Analysis of Myring-Savonius wind turbines
Salman N. D.
,
Kiss P.
A study of pressure–sinkage relationship used in a tyre-terrain interaction
Sarankó Á.
,
Kalácska G.
,
Keresztes R.
Analysis of Vibration During Turning Process of Different Materials
Sipkás V.
,
Bodnár G.
Testing of Micro Switches for Garden Tools
Stojic B.
Neural Network Based Enveloping Model of Agricultural Tyre
Stojic B.
Frequency Domain Analysis of Tractor Tyre Enveloping Properties
Straka L.
,
Dittrich G.
Impact of physical properties of workpiece material on material removal rate at EDM
Straka L.
,
Dittrich G.
Improving of geometric precision in the manufacture of circular holes using technology WEDM
Szabó D.
The possibilities of Additive Manufacturing in medical use
Szakál Z.
,
Kári-Horváth A.
,
Pataki T.
,
Odrobina M.
The Mechanical Properties of 3D Printed CuZn28 Brass Specimens with Different Orientations
Szántó A.
,
Hajdu S.
Vehicle Modelling and Simulation in Simulink
Tollár S.
,
Bolló B.
Simulation of an Operating Machine in Dust Chamber
Tóth A.
,
Halász K.
Properties of Cellulose Sheets Modified with Potassium-Humate and Copper (II)-Sulfate
Tóth L.
,
Fábián E. R.
The Effects of Quenching and Tempering Treatment on the Hardness and Microstructures of a Cold Work Steel
Varbai B.
,
Tolnai F.
,
Májlinger K.
Effects of TIG Reheating on Duplex Stainless Steel Weld Microstructure
Várkonyi Zs.
,
Sebesi V.
,
Örvös M.
Examination of Infrared Tomato Drying
Venczel M.
,
Veress Á.
Introduction to Design and Analysis of Torsional Vibration Dampers in Vehicle Industry
Tiba Zs.
,
Fekete-Szűcs D.
Designing Aspects and Classification of Bearing Industry Box Handling Apparatus
Biczó R.
,
Kalácska G.
Micromechanical model of dry friction hybrid polymer composite clutch facings
Jónás Sz.
,
Tisza M.
Determination of different parameters to high strength steel clinch joints by FEA
Gerezgiher A. G.
,
Bsrat H. A.
,
Simon A.
,
Szabó T.
Development and Characterization of Sisal Fiber Reinforced Polypropylene Composite Materials
Szíki G. Á.
,
Szántó A.
,
Sarvajcz K.
Measuring the dynamic characteristics of electric motors
Oussai A.
,
Bártfai Z.
,
Kátai L.
,
Szalkai I.
Development of a small-scale plastic recycling technology and a special filament product for 3D printing
Gyarmati G.
,
Fegyverneki Gy.
,
Mende T.
,
Tokár M.
The Effect of Fluxes on the Melt Quality of AlSi7MgCu Alloy
Markova K.
Composition basics and analysis of visual language of the product
Kheireddine Z.
,
Oldal I.
Virtual Testing Method of Human Knee Prosthesis
Malak M. S.
The Impact of Electrical Vehicles on Sustainability: Jordan as a Case Study
Buta S.
,
Szamosi Z.
,
Siménfalvi Z.
Designing of lab-scale anaerobic digester equipped with maxblend impeller to evaluate effect of mixing on anaerobic digestion
Ľuptáčiková V.
,
Hnilica R.
,
Ťavodová M.
Increasing the life of mulching tools
Tajti F.
,
Berczeli M.
,
Weltsch Z.
Improvement of High Strength Automotive Steels Wettability Properties Using CO2 Laser Surface Treatment
Menyhárt J.
,
Szabolcsi R.
Battery Measurement Methods and Artificial Intelligence Applied in Energy Management Systems
Muhandes H.
,
Kalácska G.
A Slurry-Pot Abrasive Wear Test Device for Several Composite Materials
Udvardi B.
,
Géber R.
,
Kocserha I.
Investigation of Aluminum Dross as a Potential Asphalt Filler
Kári-Horváth A.
,
Pataki T.
,
Szakál Z.
The Effect of MMS Lubrication on Surface Roughness During Machining
Dovramadjiev T.
Digitalization of Ancient Sculpting Models and 3D Design Using Photogrammetry Methodology
Lotfi A.
,
Marcsa D.
,
Horváth Z.
Modeling the Thermal Behavior of Permanent Magnet Synchronous Motors
Sisodia R.
,
Gáspár M.
,
Guellouh N.
HAZ Characterization of Automotive DP Steels by Physical Simulation
Svoreň J.
,
Javorek Ľ.
,
Naščák Ľ.
Intrerchange of Heat in Saw Disc Body During Cutting
Matica L. M.
,
Kovendi Z.
,
Gergely E.
,
Coroiu L.
Speed Variation along an Imposed Linear Trajectory, for Robotic Arms Motion
Guellouh N.
,
Szamosi Z.
,
Simenfalvi Z.
Combustors with Low Emission Levels for Aero Gas Turbine Engines
Erdélyi v
,
Jánosi L.
Digital Twin and Shadow in Smart Pork Fetteners
Bubenkó M.
,
Molnár D.
Simulation Aspects of the High Pressure Die Casting Process